I've modded this DDD-1 to have a db25 jack for all of the bends and a switch attached to x2 to have a 2.5 octave pitch shift.
I built a breakout box using an old DB25 cable and am old intercom system as the case.
It's really rough because it's just a prototype for the next one. I'm really into the idea of modular hookups right now and will do this again, but prettier. My big problem is cutting a hole for the DB25 port.
(http://dl.dropbox.com/u/120201/DSC_0360.JPG)
[/color]
Way too big. Images will be downsized tommorow and I'll have video.
Looks sexy. Can't wait to see the video.
ever heard of screws? ;)
Yeah, it's ugly. The breakout box was done in this old intercom case that's really nasty so I wanted the install to reflect the roughness.
The DDD-1's DB25 port, on the other hand, was just an accident of bad hole cutting. It's been a few years since I did this sort of thing, so I'm a bit rusty.
Bit of a delay with the video. Will have it later this weekend.
Got drunk and delayed. Coming soon.
COMING SOOOOOOOOOOOON