Print Page - Akai S20 with LTC1799 and Bend Bus(like)

Title: Akai S20 with LTC1799 and Bend Bus(like)
Post by: noiseybeast on September 18, 2011, 04:31:43 AM

Hi everyone!

I worked on this for too long due to silly technical issues that I describe in the video.

I used a variation of the bend bus idea as I only had SPDT with no center off -so common was a wire run to all of the switches. You have to turn on 2 switches on the bus to get an effect, but there are 6 other switches that don't use the bus. 2 of these switches don't seem to do anything-I think I wired them to the wrong leads.

Circuit Bent/Modded AKAI S20 with pitch mod. (http://www.youtube.com/watch?v=0xhsZSUsEbU#)

All samples are from a Doctor Who documentary (DELIA!!!) No effects are used.

Thanks again to Crusty Paul for the LTC chips and for the inspiration for this!

Title: Re: Akai S20 with LTC1799 and Bend Bus(like)
Post by: noiseybeast on September 19, 2011, 04:52:09 AM

http://youtu.be/Grs1sdEZMHE (http://youtu.be/Grs1sdEZMHE)

This is the other unit I had done prior to the above video. I love this sampler!

Circuitbenders Forum

Circuitbenders Forum => Circuitbending discussion => Synths & Samplers => Topic started by: noiseybeast on September 18, 2011, 04:31:43 AM