Here's a pic of my out of control modular synth project.
mmmm, nice!
What format is it based on?
*boner* please, video. Please.
WHOA! "Operator, how may I direct your call?" You must work out of a laboratory.
thanks alot it's 5u high and 1u,2u,3u or 4u wide modules (88u total over 4 cab's) it's not really based on any of the popular systems, i just liked the size though it is used alot of people go for the smaller modules it does occupy alot of space now and looks abit formidable and sounds pretty crazy! I'll try and get a video together soon it does look like a laboratory at mine much to my girlfriends dismay, maybe i'll get a lab coat! cheers
Looks awesome!!!!!!!!
beam me up scotty ;D
thats sweet mate
Very beautiful Creation Ian....
WOW AMAZING!
- that's what I call serious solder iron action!
;D
thanks dudes it has been a seriously mind boggling amount of work, not for the faint hearted, there is about 55 modules in it. It turns into a big pit that you just funnel (lots of!) money into to make it grow and i think the amount of work almost pushed me to exhaustion at quite a few points, but i can look at the photo's of it from my hospital ward and i'm happy (joking!) ;D
Quote from: electoyd on January 10, 2012, 07:06:17 PM
It turns into a big pit that you just funnel (lots of!) money into to make it grow and i think the amount of work almost pushed me to exhaustion at quite a few points, but i can look at the photo's of it from my hospital ward and i'm happy (joking!) ;D
Thats why i've never started a serious modular other than an old paia 4700 series.
I know what i'm like and it'd only be a matter of time before it would be taking up 90% of the space in my studio. The other 10% being taken up by me lying on the floor and foaming at the mouth with an insatiable desire for just one more module. JUST ONE MORE! :o
that describes the modular 'illness' perfectly Paul. I have very little studio space left and have only recently stopped foaming at the mouth having finally sickened myself of 'modules'.
WOW thats impressive!
i was thinking about building some modular components myself bit by bit. have you got any links for information on how to get started?
my knowledge is pretty basic but id love to start building parts
also ive got a question which might sound dumb, but as i said, im a newb. how does the power work on something like this? do the modules that need power share a power supply? im pretty confused about that.
thanks
Quote from: parricide on January 17, 2012, 06:49:44 PM
. how does the power work on something like this? do the modules that need power share a power supply? im pretty confused about that.
Usually you'll have a big power supply in the case that will give you a certain number of power rails depending on what format you're building too. Maybe you'll have +12v, -12v, +5v and ground. Each module will be wired to those rails depending on what power it needs.
The supply will have a maximum milliamp rating and each module will draw a certain amount of milliamps, so you have to add up how many ma every module will be drawing together and make sure you don't exceed what the PSU can supply.
Often the power is supplied on a ribbon cable with a multiway header for each module, but on older stuff like the Paia modular i have, there are actually copper rails in the rear of the casing for each power rail, and you just wire your modules to those rails.
Quote from: Circuitbenders on January 17, 2012, 09:26:00 PM
Quote from: parricide on January 17, 2012, 06:49:44 PM
. how does the power work on something like this? do the modules that need power share a power supply? im pretty confused about that.
Usually you'll have a big power supply in the case that will give you a certain number of power rails depending on what format you're building too. Maybe you'll have +12v, -12v, +5v and ground. Each module will be wired to those rails depending on what power it needs.
The supply will have a maximum milliamp rating and each module will draw a certain amount of milliamps, so you have to add up how many ma every module will be drawing together and make sure you don't exceed what the PSU can supply.
Often the power is supplied on a ribbon cable with a multiway header for each module, but on older stuff like the Paia modular i have, there are actually copper rails in the rear of the casing for each power rail, and you just wire your modules to those rails.
thanks for the reply. i think i understand how it works.
i was planning on building all the modules as seperate things in no necessary order in a way that would allow a kind of mix and match approach (like guitar pedals), rather than have all of the modules in the same box. in this case i would need to build a separate power supply which i could plug the various modules into.
could i just build a PSU with various outputs and a lot of amps and build the voltage converters into the modules?
sorry for the potentially dumb questions, i havent really dug deeper into this stuff than following guides and poking around in the toys you sent me yet. i hit a wall for a while but im trying to get back into it again.
thanks
that thing is Huge! does it sound Huge as well?
(i like the word Huge.)
Quote from: parricide on January 18, 2012, 04:38:44 PM
in this case i would need to build a separate power supply which i could plug the various modules into.
could i just build a PSU with various outputs and a lot of amps and build the voltage converters into the modules?
sure, i'm just not entirely sure what you mean by voltage convertors?
the PSU is a voltage convertor (mains to needed voltages), so you just plug your modules into what the PSU supplies..
I think converters means regulators in this context.
In theory you could have one big power supply in a box with loads of outputs for different modules in other boxes, but bear in mind the voltages you would need. As i say, some modules might need +12v, -12v, +5v and ground, so you'd need a 4 core power lead.
At a push you could get +12v and -12v in the PSU itself, and then use a 7805 regulator wired up to the +12v rail in the modules themselves if you needed +5v for something. That would mean you only needed 3 core power leads.
thanks guys. no doubt i will be starting a new thread for some details on this when it actually comes to it :) i have a better understanding of how i would do it now though.
thanks for the help, and sorry op for hijacking the thread