Text only | Text with Images

Circuitbenders Forum

Circuitbenders Forum => Drum machines => Circuitbending discussion => circuitbenders.co.uk CB55 - DIY Boss DR55. => Topic started by: jepyang on April 14, 2015, 11:20:28 AM

Title: Snare and Hats switching jacks
Post by: jepyang on April 14, 2015, 11:20:28 AM
Anyone know a Canadian/North American source for the 7-pin switching jacks used for the snare and hats individual outs?I can't find anything from Digikey or Mouser. I found a couple possibilities on ebay, but the sellers are from China and don't have data sheets or part numbers available so I don't know the pinout.
Title: Re: Snare and Hats switching jacks
Post by: Circuitbenders on April 14, 2015, 04:08:25 PM
You could always use actual switches and switch J1 and J2 in and out by hand.
Title: Re: Snare and Hats switching jacks
Post by: jepyang on April 14, 2015, 10:32:54 PM
That's plan B but the switching jacks just seem like such an elegant solution to a messy problem.
Title: Re: Snare and Hats switching jacks
Post by: Altitude on April 15, 2015, 03:15:31 PM
has anyone considered passively mixing the noise before the jack?
Title: Re: Snare and Hats switching jacks
Post by: Circuitbenders on April 15, 2015, 08:42:24 PM
Quote from: Altitude on April 15, 2015, 03:15:31 PM
has anyone considered passively mixing the noise before the jack?

in what sense?
Text only | Text with Images