I found a CrystalClock on the MainBoard and managed to remove it and replace with LTC1799 (using the "pre-assembled" version)
It works!!! - - - - But I have Issues:
1. I can only go down - twisting the 100K Poti that controls the ClockSpeed all the way up results in the machine functioning normally - it doesn´t go above the normal operating speed.
2. It will let me go low but if I do "digital crackling" is introduced to the signal - there is no "clean down-pitching"
3. It doesnt make a difference if I solder the LTC1799´s output to "the one pin" or "the other pin" - according to the infos one pin should let me mess with the clock speed the other one shouldn´t but in my case both work (with the above mentioned issues)
Please help!!!