Modded/Bent DDD-1 Mark2

[noiseybeast]

I've modded this DDD-1 to have a db25 jack for all of the bends and a switch attached to x2 to have a 2.5 octave pitch shift.  

I built a breakout box using an old DB25 cable and am old intercom system as the case.

It's really rough because it's just a prototype for the next one.   I'm really into the idea of modular hookups right now and will do this again, but prettier.  My big problem is cutting a hole for the DB25 port.  

[/color]

[noiseybeast]

Way too big.  Images will be downsized tommorow and I'll have video.

[Dylan]

Looks sexy. Can't wait to see the video.

[Circuitbenders]

ever heard of screws? 

[noiseybeast]

Yeah, it's ugly.  The breakout box was done in this old intercom case that's really nasty so I wanted the install to reflect the roughness.  

The DDD-1's DB25 port, on the other hand, was just an accident of bad hole cutting. It's been a few years since I did this sort of thing, so I'm a bit rusty.

[noiseybeast]

Bit of a delay with the video.  Will have it later this weekend. 

[noiseybeast]

Got drunk and delayed.  Coming soon.

[noiseybeast]

COMING SOOOOOOOOOOOON