Share your painting tips

[dislocations]

I feel re-painting is often overlooked. For me I'm usually relieved an instrument is finished and working :-))
So, come on and share!!!

[01012k7]

If its plastic i nomal use plastic primer first or if its metal then metal primer also sanding is important  fine wet and dry nomal i finish 800 also put you vinyl film on then most important paint lacquer

here the sort of thing i do

[adamduke]

my biggest holdup is doing text - i'm using rub-on letters for gods sake.  there must be a better way.
Lazertran?  Can I only do that on metal enclosures?

[01012k7]

I use  Transparent lazer Printable Vinyl but you can get Transparent Inkjet Printable Vinyl its about £ 2 pound for A4 sheet and you can use your favorite paint software to make your design, Here a tip do a test run to make shure size is right also you can print it out on paper first and use masking tape and then use it for drilling holes ETC..