• Welcome to Circuitbenders Forum.

Wobble Vison question

Started by benjah, April 17, 2006, 09:05:05 PM

Previous topic - Next topic

benjah

Hi,
I've tried to wobble a small LencoTv, but the colour of the cables connected to the yoke are not the same as the ones figured in the links of the previous post
http://electro-music.com/forum/viewtopic.php?p=45087&sid=0bdacd969472eaf40f36f255309deed8
I've 5 cables : (see photo)
Black cable connected to the yoke with "B" sign on the connector's board
Yellow => "Y"
Red =>"2R" ?
Brown =>"7" ?
Blue =>"G" ?
I can't see on the tv board where theses cables are connected because of withe gul on it
Could anayone tell me wich color on my Tv correspond to the RGBYellow colors showed on the web link ?


thanks by advance
Benjamin


Circuitbenders

er, that doesn't look like the yoke to me. That looks like the board that pulls off the back of the tube that supplies power to the heater etc. If you can pull it off its certainly not the deflection yoke.

The deflection yoke is the coil clamped around the tube further down. The wires may not be the same colour but there should only be four and its just a matter of experimenting
i am not paid to listen to this drivel, you are a terminal fool