Which Potentiometers on a Monotron

[R.U. Nuts]

Hello everybody, this is  my first post here:

I want to put a Monotron in a new housing with CV-ins and proper in- / output jacks. i will need new potis as well.

And that´s my problem:

Does anybody of you know which Potis I need? I want to replace the volume wheel and the trim pot at the backside as well. So any information about this will be helpful for me.

thanks in advance!

[Gordonjcp]

Have a look at the Monotron circuit - it'll give you all the values.

[Bogus Noise]

A multimeter would also come in handy!

[Synthetech]

Have a look at the Monotron circuit - it'll give you all the values.

Let's play Find Waldo....








Hmmm....   looks like every pot on the board is 10K except VR1.. it looks like it's 100K

[Gordonjcp]

10K Log don't forget, otherwise the controls will be all up one end.

Just about everywhere in the world, A taper pots are linear and B is logarithmic.  The US has to be different though, and has B for linear and A for log.  If you're unsure, look for a volume control - they're pretty much always log.

VR1 is 100 ohms.  Is it actually broken out to the panel, or is it just an internal scale tuning pot?