IRC Channel?

goldenbaby · May 03, 2009, 05:30:34 PM

I have used mIRC for years....Now when I downloaded Colloquoy, I have figured out to connect to EFnet, but I am unable to connect to FreeNode. Here are my details:

irc.freenode.net
Server Port: 6667
SSL: No
Username: goldenbaby
Nickname: goldenbaby

goldenbaby · May 03, 2009, 05:40:59 PM

Installed some IdentD crap, and am connected. There's doesn't appear to be anyone in the channel, however.

pneaveill · May 03, 2009, 05:51:04 PM

Quote from: kick52 on February 11, 2008, 07:06:45 AM
Quote from: Circuitbenders on February 11, 2008, 01:25:04 AM
I know absolutely nothing about IRC and i've never used it, but if you know what you are doing then by all means, get to it!

not sure how popular it would be as the most members we've ever had on this board at any one time is 5 or 6 but maybe people who don't sign into the forum would use IRC, who knows.

OK, irc://irc.freenode.net/#circuitbending

Circuitbenders, why don't you grab the windows client below. You can join, I'll op you up, and show you some basics.

Free Windows client: http://www.silverex.org/download/
Free Mac client: http://colloquy.info/
Free Linux client: http://irssi.org

Appreciate the mention of Linux very much. Would like to make others aware that though I have not used the IRC capabilities on Pidgin, it does have them. I mention this because Pidgin/Giam has gotten more popular over the years. Would love to livechat with you guys. Now need to figure this IRC thing out.

jyooruje · July 03, 2009, 08:14:17 PM

is need premission to enter in the channel?? can you please give it to me? my username is the same here and on IRC thanks

Gordonjcp · July 03, 2009, 08:32:04 PM

Quote from: jyooruje on July 03, 2009, 08:14:17 PM
is need premission to enter in the channel?? can you please give it to me? my username is the same here and on IRC thanks

No, you just need to connect to Freenode and join #circuitbending - if that doesn't work then please either PM me on Freenode or here. Note that you may need to register your nick before you join, and you definitely will to PM.

jyooruje · July 03, 2009, 09:25:48 PM

i have a nick registered when i try to enter in channel this line appar

" #circuitbending unable to join channel (invite only)"

maybe you have some mode on the channel on that just allow invited user to enter!

Gordonjcp · July 04, 2009, 03:19:05 AM

Yup, it wasn't me that set it up.

Try now, I removed +i - it's no wonder the channel has been quiet...

Gordon

jyooruje · July 05, 2009, 05:13:17 PM

remove the +m too... with that on the channel is moderate and only useres with voice can talk....

Gordonjcp · July 06, 2009, 01:00:47 PM

Sorted.

ScissorFeind · July 20, 2011, 07:08:19 AM

I am super stoked to see this!
Hopefully there are people who actually do visit here?

Lets all be friends!

ablablablablabla · May 14, 2012, 10:47:16 PM

aw.. it's empty...

Gordonjcp · May 15, 2012, 07:10:35 AM

We should really kick this off again...

Gordonjcp · May 15, 2012, 07:12:16 AM

Actually to line up with the current Freenode rules it should be ##circuitbending with two #s

01012k7 · May 15, 2012, 07:21:28 PM

i use irc but you need a few on the channel for it to be fun